Latest turret lathe machine Tenders | Government turret lathe machine Tenders

CTN :44958873

27 May, 2026 NA

Meerut - Uttar Pradesh

Tender For bid to ras supply of backing pad for sanding machine : - backing pad for sanding machine gex thirty four one hundred fifity , float valve three inch metal for test bed no twenty one , spider l two twenty five for test bed no twenty one , gate valve two inch metal for test bed no twenty one , t pin connected with wire for ac two ton split , pressure pipe steel for press sleeving hydraulic machine , screw thread lead screw for lathe machine , solid tyre size seven to twelve for forklifter five ton , solid tyre size three hundred to fifiteen for forklifter five ton , bearing gen set sixty three kva , potentiometer potel vr three to fifty k ohm for power supply regulated sixty four v five a , on off switch for power supply regulated sixty four v five a , cooling fan two twenty v four inch for power supply regulated sixty four v five a , copper winding wire twenty one swg for lathe machine capstan , copper winding wire twenty three swg for lathe machine capstan , phase preventerfor lathe machine capstan

CTN :45261985

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneousellaneous scrap - sc cond. miscellaneous type machine and machineray parts and fitting including vertical turret lathe machine in dismental condition, diesel generator set without alternotar,pumping set, host cap,crain parts, long block with accessories, machine gear, cutting chain, cut of lift accessories , machine chain and varrious other machine and machineray parts and fitting with or without n/f attachment. not fit for railway use. remarks - cutting is allowed on conditional basis. if any loss will be found during cutting. it will be recoverd from concern purchaser location- south side of erwb near railway track. in area i lbpl, dbaw , gst-18% ,tcs-1%, hsn-845969 , allocation-20714208

State Government

CTN :45146120

25 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - 3 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe from bore well, cost towards rewinding and repairing of 3 h.p submersible motor with s/f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrap materials., cost towards repairing of 3 h.p. submersible pump with s/f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 40 mm dia. upvc column pipe., cost towards supplying and fitting (1) 40 mm dia g.m. full way valve 1 no (2) 40 mm dia nr valve 1 no (3) 40 mm dia g.i. bend 2 nos. (4) 40 mm dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrap materials., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., supplying and installation suitable size panel board for 3 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well, 5 h.p. submersible set, providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., cost towards supplying fitting, changing 50 mm dia. upvc column pipe., supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as (1) d.o.l starter 1 no. (2) hrc fuse 3 no. (3) volt meter with selector witch -1 set (4) ammeter with selection switch 1 set (5) indicating neon lamp 3 no. etc. all complete., transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., providing all labour, tools tackles and technicians for lowering of 5 h.p. submersible pump set with all accessories in the bore well, 7.5 h.p. submersible set -, providing all labour, tools, tackles and technicians for taking out 7.5 h.p. submersible pump set with column pipe from bore well ., cost towards for rewinding and repairing of 7.5 hp submersible motor with s/f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrap materials., cost towards repairing of 7.5 hp submersible pump with s/f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete after the deduction of cost of scrap materials., providing all labour, tools tackles and technicians for lowering of 7.5 h.p. submersible pump set with all accessories in the bore well, transportation charge of above p/set from work site to work shop and vice versa including loading and unloading charge., provision for leakage repairing of different size of upvc sch- 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenches and replacement of pipe and fitting so as to give 1 m average cover over the socket of pipes with disposal of exc

Central Government/Public Sector

CTN :45254462

04 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply, installation & commissioning of shredding machine (ferrous metal chip crusher unit) for hyt make cnc pit wheel lathe. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45271544

29 May, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of condemned - atomizer (assorted)(as its condition),condemned - sticker cutting plotter machine and other items (as its condition),condemned - open metal barrel(as its condition),condemned - closed metal barrel (as its condition),condemned - damaged air baloon (as its condition),condemned - 10.00 x 20 full size flap (as its condition),condemned - 12v 25p (150 amps) plastic battery (as its condition),condemned - 12v 25p (180 amps) plastic battery (as its condition),condemned - ltv battery (as its condition),condemned - tyre buffing dust (as its condition),condemned - 10.00 x 20 radial tyre(as its condition),condemned - 11.00 x 22.50 radial tyre(as its condition),condemned - 7.50 x 16 radial tyre(as its condition),condemned - 7.50 x 16 nylon tyre(as its condition),cond - ltv tyre (assorted) (as its condition),condemned - 10.00 x 20 tube with neck (as its condition),condemned - tube cut pieces (as its condition),condemned - waste rubber materials (as its condition),condemned - waste paper records(as its condition),condemned - wooden small cut pieces, waste plywood & mica (as its condition),condemned - tree wood cut pieces(as its condition),condemned - bs iii radiator core (alu.) (as its condition),condemned - old aluminium cut pieces (as its condition),condemned - self motor (assorted)(as its condition),condemned - alternator (assorted)(as its condition),condemned - wiring horness(as its condition),condemned - electrical items :- and other items,condemned - used oil in 210 lts barrel (as its condition),condemned - used grease in barrel (as its condition),condemned - empty plastic barrel(as its condition),condemned - waste plastic materials (as its condition),condemned - auto iron (as its condition),condemned - brake drum (as its condition),condemned - broken spring leaves (as its condition),condemned - auto bearing with balls & cones (as its condition),condemned - brass bush, brass rivet (as its condition),condemned - battery cable with sleeve (as its condition),condemned - iron chips & burrs ( 12 - barrels) (as its condition),condemned - brake shoes with brake lining (assorted) (as its condition),condemned - radiator with iron frame bracket (as its condition),condemned - fuel pump assly (as its condition),condemned - power steering box with braket (as its condition),condemned - power steering box without braket (as its condition),condemned - gear box counter shaft with gear - and other items,condemned - axle shaft (assorted) (as its condition),condemned - door cylinder (assorted) (as its condition),condemned - hydraulic jack (assorted) (as its condition),condemned - machinery item lathe machine 3 nos (as its condition),condemned - waste m.s. iron scrap (as its condition),condemned - roofing iron structure & m.s.iron (as its condition),condemned - waste gi scrap (as its condition),condemned - engine oil filter and diesel oil filter (as its condition),condemned - wheel disc (as its condition),condemned - bs iii tyre lock ring (as its condition),condemned - radiator fan clutch with leaf = 830 nos (as its condition),condemned - contaminated paint tins (as its condition),condemned items : ceiling fan with leaf -and other items,condemned :- fly wheel - 168 nos, and other items,condemned - oil seperetor and other items,condemned :- radiator top tank and other items,condemned - a/c bus body shell(as its condition),condemned - bus body shell(as its condition),condemned - red bus body shell(as its condition)

corporations/Associations/Others

CTN :45168289

22 May, 2026 NA

Mysore - Karnataka

Tender For auction sale of ms scrap,scrap of c.i boring m.s. turning and boring mixed,scrap of c.i boring/m.s. turning and boring mixed with mud,m.s.melting scrap,ms iron baleputty scrap,scrap of rubber,scrap of used unserviceable cast iron galvanised iron or ms pipes,m.s.scrap of miscellaneous items,scrap of used welding coil spools,scrap of condmened damaged/rejected nh cnc lathe,scrap of unserviceable battery operated platform truck-3 wheeler,ms scrap,scrap of used unserviceable diesel forklift-5ton,scrap of condmened portable air compressor elgi make,scrap of condmened cp compressor,scrap of condmened lancer boss,scrap of electrical items,scrap of condemned cutting tools hand tools,electronic waste,scrap of condemned bearings,scrap of used condemned lead-acid batteries and dry batteries,scrap of condemned production equipment parts made of alluminium,scrap of condemned ms hydraullic tube structures,scrap of condemned seamless ms tubes,ms scrap of obsolete wheel rims,ms scrap of condemned damaged un-serviceable field returned items,scrap of used condemned non-reusable welding cables,scrap of miscellanious items of various metal and metal alloys,scrap of condemned damaged tungsten carbide inserts,ms scrap of condemned used rejected jigs and fixtures,scrap of used oil,scrap of used empty plastic oil barrels,scrap of used empty ms grease barrels

Central Government/Public Sector

CTN :45160139

22 May, 2026 NA

Sonpur - Bihar

Tender For auction sale of others - this lot, metal chips of turned wheels consists of (i) lot no- sse/c&w/bju/metal chip/03/26 of accumulated metal chips of turned wheels, qty- 2.217 mt and (ii) anticipated arising of metal chips of turned wheel for next three months, qty- 6.651 mt. location- sse/c&w/bju wheel lathe.

CTN :45086187

26 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of customized annual maintenance contract/cmc for pre-owned products - annual maintenance contract of single column vertical turret lathe machine (vtl-150) and surface grinding machine (elb) for a period of three years; as per scope of work; annual maintenance contract (amc); as per scope of work; ye..

CTN :45036193

05 May, 2026 NA

Delhi - Delhi

Tender For expression of interest document for supply and delivery of school requisites 2026 for secondary schools (design and technology) - supply and delivery of school requisites 2026 for secondary schools (design & technology) - angle grinder, band saw, bench drilling machine, bench grinder, circular saw, compressor, spraygun, drilling machine (portable), extension cable, hot wire cutter, jig saw (portable), metal lathe, planer / thicknesser, router (portable), sander -orbital, soldering iron, strip heater, welding machine, wood working lathe, abrafile frame, adjustable spanner, adjustable spanner, anvil, bench hook*, bench shear (guillotine), bradawl, carpenters mallet, centre punch, centre square, chisels- mortice, chisels- mortice, chisels -bevelled edge, chisels -bevelled edge, chisels -bevelled edge, chisels- firmer, chisels- firmer, chisels- firmer, cold chisels, combination drill, combination pliers, coping, saws, corner clamps, countersunk bit, dividers, engineers square, engineers vice, forstner bit, g cramps, g cramps, hacksaw, hammer: ballpein, hammer: ballpein, hammer: ballpein, hammer claw, hammer cross pein, hand drill, hand files including handles, hand files including handles, hand files including handles, hand saws, hand saws, inside calipers, jack plane, jenny calipers, junior hacksaw, machine vice, marking gauge, marking knife, measuring tape, metalwork bench, mitre box, mole grip, nail punch, needle files, oil can, oil stone, outside calipers, pincers, pipe wrench, rasps, ring spanner, riveting machine kit, router bits, sash cramps, saw set, screw driver, screw driver, scriber, sliding bevel, smoothing plane, spanner - open ended, spirit level, spoke shave, spoke shave, steel rule, taps and dies, tenon saws, tinmans snip, tinmans snip, try square, v-block and clamp, vernier calliper, wire brush, woodwork bench, woodworkers bench vice, blackboard compasses, blackboard protractor, blackboard rule, blackboard set squares, design tables, isometric-grid blackboard*, square-grid blackboard*, whiteboard compasses, abrafile blades, coping saw blades, emery cloth, emery cloth, emery cloth, goggles, hacksaw blades, junior hacksaw blades, masks - respiratory, masks - dust, paint brush*, paint brush*, paint brush*, welding apron, welding gloves, welding rods.

CTN :44926927

27 Apr, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply and delivery of school requisites 2026 - angle grinder-grinding wheel, diameter 110 mm , power range, 750w to 2000w, 240v + key (eu), band saw-table size 400 x 548, mm, 900 w or 340 x 335 mm, 350, w 240 v + blade and sense (eu), bench drilling machine-13mm, chuck, 240v, minimum table size, 260 x 180 mm + chuck key (eu), bench grinder-minimum 250 w,, 240v, circular saw-minimum 1.5kw,, 240 v + fence and cross-cut guide, (eu) (table mounted), compressor -output 50l/min, 6, bar, 340 w + supply hose and clips, (eu), spraygun-0.7 mm nozzle, diameter, 800 cl capacity (approx), (0.7 mm - 1.4 mm), drilling machine (portable)-, chuck diameter 3 - 16mm, 240 v +, chuck key, extension cable-20 metres, hot wire cutter-40 w, 240v, jig saw (portable)- power range, 300 600 w, 240v + allen, key(eu), metal lathe-1.5kw, distance, between centres 750 mm, including tool bit, boring bar,, knurling tools, parting tools, tail, stock, chuck key, centre drill, dead, centre, revolving centre, face, plate, 4-jaw and 3-jaw chucks., (eu), planer / thicknesser-maximum, planing width 310mm,maximum, thicknesser capacity 230, mm,power range 3kw to 4kw,, 240 v + fence(eu, router (portable)- power range, 1200w to 1800 w, 240v + key, (eu), sander orbital-power range 250, w to 300 w, 240v (eu), soldering iron-80 w, strip heater-140 w, 240v, welding machine-electric arc, 6kw, 150a, 240v (with protective, casing) incluing clamp, cables and, shield. (eu), wood working lathe-distance, between centres 1093 mm, 550, w, 500 - 2000 revolutions per, minute including face plate, dead, centre, revolving centre, turning, tools and tool rest., abrafile frame-4" deep/blade, length 6" (+ blade on frame), adjustable spanner-jaws open : 22, mm length: 200 mm, adjustable spanner-jaws open : 31, mm length: 300 mm, anvil-50kg, bench hook*-material: beech, size:250 mm x 150 mm, bench shear (guillotine)- up to 4, mm sheet and 10 mm rod, bradawl-minimum blade length, 32 mm, carpenters mallet-4.5 head width, centre punch-round head,, knurled body, 4" length, centre square-std size 75 mm, chisels- mortice-size: 6 mm, chisels- mortice-size: 9 mm, chisels -bevelled edge-size: 12, mm, chisels -bevelled edge-size: 19, mm, chisels -bevelled edge-size: 25, mm, chisels- firmer-size: 6 mm, chisels- firmer-size: 12 mm, chisels- firmer-size: 25 mm, cold chisels-type: flat, size:150 mm x 12 mm, combination drill-std drill set, combination pliers-size: 200 mm, coping saws-blade length: 150, mm, corner clamps-cramping capacity, 4" mild steel type, countersunk bit-head diameter:, 3/8" length: 2", dividers-length 6", engineers square-length 6", engineers vice-jaw width: 6", engineer's swivel base table (50, mm), forstner bit-bit set: sizes 10, 12,, 15, 16, 18, 20, 22, 25, 26, 28, 30,, 35, 40, 45 & 50 mm, gcramps-capacity: 6", gcramps-capacity: 12", hacksaw-non-adjustable 12", tubular frame wing nut tensioning, device for 12" blades, hammer: ballpein-0.5 lb, hammer: ballpein-0.75 lb, hammer: ballpein-1 lb, hammer claw-0.5 lb, hammer cross pein-0.75 lb, hand drill-chuck capacity 8 mm, hand files including handles-size:, 6", hand files including handles-size:, 8", hand files including handles-size:, 10", hand saws-22" long - cross cut, hand saws-22" long -rip, inside calipers-arm length 6", jack plane-14" long, jenny calipers-arm length 6", junior hacksaw-length blade 6", machine vice-maximumm jaws, opening 85mm, marking gauge-minimum length, 240mm, marking knife-length of body, 15cm, measuring tape-measuring length:, range 3m to 5 m, metalwork bench-size 2010 x 810, x 800mm, mitre box-mitre block 9" long, (plastic), mole grip-length 7, nail punch-set of 4 nail punches;, 1.5, 2.5, 3 & 5 mm, needle files-set of 6 - 14cm, oil can-2 pints capacity (1-2 pint), oil stone-150 mm length, outside calipers-arm length 6", pincers-length of body: 180 mm, pipe wrench-length: 300 mm, rasps-length size: 200 mm - 350, mm, ring spanner-set 6mm 25mm, riveting machine kit-sets rivets, up to 5 mm

Turret Lathe Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector